Side-clamp
Dimensions / Performance
- The Moment of Inertia and Mass values are based on products with max. Inner diameter.
- Please modify rated/max. torque value with temperature correction factor when it’s higher than 30ºC.
- Max. torque/rated torque is the value regarding to a coupling’s self-durability and is not related to slip-torque between the coupling bore and the shaft.
Standard Inner Diameter (ID)
Model | Standard Inner Diameter (d1, d2) (mm) | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
3 | 4 | 4.5 | 5 | 6 | 6.35 | 7 | 8 | 9 | 9.525 | 10 | 11 | 12 | 14 | 15 | 16 | 18 | |
SJC□-14C | ● | ● | ● | ● | |||||||||||||
SJC□-20C | ● | ● | ● | ● | ● | ● | ● | ||||||||||
SJC□-25C | ● | ● | ● | ● | ● | ● | ● | ● | |||||||||
SJC□-30C | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● | |||||||
SJC□-40C | ● | ● | ● | ● | ● | ● | ● | ● | ● | ● |
- The recommended shaft tolerance is h7.
- Custom process (e.g. non-standard Inner diameter, special tolerance etc.) is also available upon a special request in prior to order placement.
- Keyway is available. (Optional)